Applies to: MS-C5366-X12PC
 

In an effort to maintain standards, Hanwha uses the web UI for all knowledge base 
articles pertaining to product configuration. Open Chrome, enter the IP Address 
of your device into the URL bar, and click Enter. If you are not using the web UI 
to configure your device, please refer to the user manual for your product. 

Summary

BLAZE supports compatibility with multiple camera interfaces; however, support must be explicitly enabled prior to use. This article describes how to enable Milesight Technology compatibility for use with BLAZE.

Setting up Video Streaming

To set up video streaming:  

1. Navigate to Media > Video.
    
2. Click the Secondary Stream tab.
    
3. Select Enable.
    
4. Click the Tertiary Stream tab.
    
5. Select Enable.
    
6. Click Save.
   
   

ONVIF Setting Configuration

To configure ONVIF:

1. Navigate to Network > Advanced > More.
   
   
    
2. Under ONVIF Setting, check Enable.
    
3. Click Save.