Applies to: PA4

In an effort to maintain standards, Hanwha uses the web UI for all knowledge base 
articles pertaining to product configuration. Open Chrome, enter the IP Address 
of your device into the URL bar, and click Enter. If you are not using the web UI 
to configure your device, please refer to the user manual for your product. 

Summary

BLAZE supports compatibility with multiple camera interfaces; however, support must be explicitly enabled prior to use. This article describes how to enable Shenzhen Vatilon compatibility for use with BLAZE.

ONVIF Setting

To set up a camera:

1. Navigate to Configuration > Network Manager.
    
2. Under Configure, check Enable ONVIF and ONVIF Auth Enable.