Guide for IP speaker contact signal interlocking method

1. Configuration condition
  - When using a single IP speaker(1 unit) alone (Model: All IP speaker)

2. Working scenario
  - When a contact signal (infrared sensor, contact button, emergency bell, etc.) is delivered
     into the IP speaker, the preset sound is broadcasted

3. Step by step how to
  ① Set as ‘Speaker mode’(default) default)→ ② Upload audio source file → ③ Set as ‘controller
       →  ④ Device registration(Speaker’s IP) → ⑤ Zone registration(Speaker’s IP)

       → ⑥ Set event & preset → ⑦ Set play

   ※ Caution

  1. When using a single IP speaker(1unit) alone, it could have a limited use of some features as the                  scenario is a minimal interworking configuration
  2. For TTS input languages, each region may have different supported languages