Applies to: TID-600R

Summary

This article describes how to create an extension in VitalPBX for the registration of the intercom.

Configuring VitalPBX

To configure VitalPBX: 

1. Log in to the VitalPBX Management Console using the Administrator account.
    
2. Click PBX.
    
3. Click Extensions.
    
4. Select PJSIP.
   
   
    

5. Provide the following (basic) Information for the TID-600R extension.
   
   Extension number (Contact the 3CX admin to usea valid numbering plan)

   Extension name (This can be as simple as the location of the TID-600R in the site)

   User Device = Extension Number

   Password

   Device Profile = Default PJSIP Profile
   
   
    

6. Click Save.
    
7. Add the TID-600R extension IP address to the PBX firewall Whitelist.
   
   
    
8. Click on ADMIN > Firewall > Whitelist.
    
9. Click Add to enter the IP address and Description of TID-600R Extension.
    
10. Click Save.
     
11. Verify the Transport protocol (TID-600R supports UDP, TCP, TLS) assigned port number and Audio/Video Codecs availability.
    
    
     
12. Click Settings > PJSIP settings.
     
13. Verify the UDP/TCP port number on the PBX (i.e. 5060).
     
14. Verify the Audio/Video codecs supported by TID-600R are available (Video codec = H.264, Audio Codecs = G711, G722, Opus).
     
15. Click Save.
     
16. Select DTMF mode (TID-600R supports RFC4733 and SIP Info).
    
    
     
17. For the save action to take effect, you may need to reload the PBX configuration. Click the icon as shown.
    
    

NOTE: For the intercom setting, see How to Set up an Intercom with a PBX Server.