Issue Summary:

This article provides notes on how to remotely control SPD-152 using SUNAPI.

Resolution:

To control layout for SUNAPI, SPD-152 must be set to SSM mode or Web mode.\
* SPD-152 has three modes. (Standalone, SSM[VMS], Web)

It can be controlled by the following example commands, and for more information check
the [Display]-[Wall] section of the [SUNAPI document].



<Example>
http://<Camera IP>/stw-cgi/display.cgi?msubmenu=wall&action=update&Index.1.Layout.1.MonitorOut.1.SplitMode=1x1
* This example command changes the layout to 1x1.