Bullet Camera Rear Assy Broken

1. Case

- Install network cameras for surveillance on the exterior walls of the building

2. Symptom
- Damage to the joint of the Rear Assy within 1 month of installation causes a risk of camera falling

3. Cause
- Cracks are generated by fastening fixed screws using power tools
- Cracking products are arbitrarily repaired and installed with instantaneous adhesive

4. Counterplan
- Use a manual tool to prevent torque overload when bolting

- Pay attention to torque control when using electric tools
- In particular, the use of power tools is prohibited in the fastening parts where plastic and metal come into contact