Applies to: All A series, Q series, X series, P series, HRX series recorders

In an effort to maintain standards, Hanwha uses the web UI for all knowledge base 
articles pertaining to product configuration. Open Chrome, enter the IP Address 
of your device into the URL bar, and click Enter. If you are not using the web UI 
to configure your device, please refer to the user manual for your product. 

Summary

This article explains how to assign logical names to your cameras in the recorder. 

Relabeling Channel Names

To relabel channel names:

1. Enter the IP of your NVR into the Chrome URL bar and log into the recorder as admin.
    
2. Navigate to Setup > Camera > Channel Setup. 
    
3. Click the Camera Name box on the camera row you wish to rename.
    
4. Enter your new channel name into the channel name column. 
   
   
    
5. Click OK to save your changes.