임민기 created an article,
Gmail stopped allowing the use of its SMTP server with your account password since 2022, if users still want to use Gmail as their SMTP Server to send Email Notifications, they will have to use t...
임민기 created an article,
Unlike Hanwha Vision devices, Axis devices do not enable ONVIF automatically once you have created the user password. Hence users will need to manually enable the function in order to add the de...
임민기 created an article,
1) HASP_CLONE_DETECTED If the installed license driver in SSM server detects H/W changes, etc, there could be a chance that the driver recognises the change as an improper use and shows the er...
임민기 created an article,
In WDM, you can find system requirments regarding WiseDetector as well as Wisenet Device Manager itself. Path: WDM > Help > Help > Running Device Manager > Requirements The current version (2...
임민기 created an article,
It is possible for an audio stream on a camera to be played via the HDMI port through a SPD-152 decoder. This will only work when the SPD is in Standalone mode: To do this, firstly enable a...
임민기 created an article,
It is possible to change the video format on the SPE-420 & SPE-1640 encoders from PAL to NTSC and vice versa On the webpage of the SPE, go to Setup -> Video & Audio -> Video Setup and then in t...
임민기 created an article,
When a time change occurs on a NVR it will create a new timeline. The current timeline will be referred to as Overlapped 0, the timeline for the recordings before the most recent time change are ...
임민기 created an article,
In rare cases, users may experience a crash in the Wave Server application or Wave Desktop client. Typically, these are isolated incidents. However, if you are facing a recurring problem take the...
임민기 created an article,
This article addresses an issue users may face with incorrect time synchronisation in SSM If users find that recorded footage of a device which is connected to Wisenet SSM jumps ahead by 1 hour, ...
임민기 created an article,
TID-600R has a Call button as an Intercom, we can set SSM event when pushing the Call button. In the default setting of TID-600R and SSM, the instant pop-up viewer works fine but one feature...