임민기

  • Total activity 99
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 0

Activity overview

Latest activity by 임민기
  • 임민기 created an article,

    SSM 2.x License Trouble Shooting

        1) HASP_CLONE_DETECTED  If the installed license driver in SSM server detects H/W changes, etc, there could be a chance that the driver recognises the change as an improper use and shows the er...

  • 임민기 created an article,

    WiseDetector System Requirements

        In WDM, you can find system requirments regarding WiseDetector as well as Wisenet Device Manager itself. Path: WDM > Help > Help > Running Device Manager > Requirements   The current version (2...

  • 임민기 created an article,

    How to play audio via HDMI port using a SPD-152

      It is possible for an audio stream on a camera to be played via the HDMI port through a SPD-152 decoder. This will only work when the SPD is in Standalone mode:      To do this, firstly enable a...

  • 임민기 created an article,

    How to change the video format from PAL to NTSC on a SPE encoder

      It is possible to change the video format on the SPE-420 & SPE-1640 encoders from PAL to NTSC and vice versa   On the webpage of the SPE, go to Setup -> Video & Audio -> Video Setup and then in t...

  • 임민기 created an article,

    How a time change on a NVR is represented in Wisenet Viewer

      When a time change occurs on a NVR it will create a new timeline. The current timeline will be referred to as Overlapped 0, the timeline for the recordings before the most recent time change are ...

  • 임민기 created an article,

    Wave Server or Wave Desktop Client Crash Troubleshooting

      In rare cases, users may experience a crash in the Wave Server application or Wave Desktop client. Typically, these are isolated incidents. However, if you are facing a recurring problem take the...

  • 임민기 created an article,

    SSM + DST

      This article addresses an issue users may face with incorrect time synchronisation in SSM If users find that recorded footage of a device which is connected to Wisenet SSM jumps ahead by 1 hour, ...

  • 임민기 created an article,

    TID-600R on SSM 2.11

        TID-600R has a Call button as an Intercom, we can set SSM event when pushing the Call button.   In the default setting of TID-600R and SSM, the instant pop-up viewer works fine but one feature...

  • 임민기 created an article,

    SSM 2.10 Privacy Mask

        1. Setting Privacy Mask in SSM 2.10 1-1. Permission   The user who would like to set Privacy Mask should be in AdminGroup. 1-2. Setup path   SSM Console Client > Configuration > Device > Regist...

  • 임민기 created an article,

    Error 403-Forbidden via Chrome

      The below article applies to models:  All XRNs. PRNs, and QRNs    Summary: If you have determined that you are getting an Error 403 Forbidden while trying to connect to an NVR via Chrome.  This m...