김지태 created an article,
Introduction You can request a JPEG image from a camera or an NVR. Below describes some tips for utilizing the command. How to use Below are the commands to request a snapshot or with Channel Nu...
김지태 created an article,
Summary: After setting the angle of view of DPTZ in Quad View of the Fisheye camera (XNF-9010RV), the set Digital PTZ angle of view is initialized after an unspecified period of time. Step By Ste...
김지태 created an article,
Summary RTSP which stands for Real Time Streaming Protocol is a standard protocol for transmitting video and audio. You can control the video stream using methods such as DESCRIBE/SETUP/PLAY etc...
김지태 created an article,
This applies to all Network Cameras with an Alarm Out. The Alarm Output connection on modern Network Cameras is not a contact closure but a voltage level change. Below, please find a diagram of ...
김지태 created an article,
If you are having difficulty viewing your device web page on IE 11, please use the settings outlines below. In the Tools menu, add the camera web page to Compatibility Mode: You then need to...
김지태 created an article,
1. Activation - It is activated only in Device - Record - On state. 2. Overwrite - You can check whether 'Overwrite' is used. 2-1) Overwrite Enable checked: - 'Free size' secu...
김지태 created an article,
For 802.1x, you need to set the below in the webviewer of cameras. 1. Setting menu - Webviewer > Setup > Network > 802.1x 2. IEEE 802.1x setup - IEEE 802.1x: Enable - EAP type: EAP-TLS ...
김지태 created an article,
Many Wisenet cameras, including the Wisenet X series & Wisenet P series feature a USB port for easy installation. Connecting a compatible WiFi dongle allows the Wisenet Installation app to be us...
김지태 created an article,
If a customer is having issues with playing back recordings using the SD card player tool after recording to an SD card, please check the following Version of the SD player tool The latest...
김지태 created an article,
If the connection setup to a NAS folder on a Synology NAS, fails Try the following: 1. Ensure the folder in the root drive and is empty: 2. Ensure SMB v1 is set to the minimum protocol...