Applies to Models: ARN, QRN, XRN, PRN, and HRX series recorders produced after Jan 2023
To maintain standards, Hanwha Vision uses the web UI for all knowledge base articles about product configuration. Open Chrome, enter the IP Address of your device into the URL bar, and press enter. If you are not using the web UI to configure your device, please refer to the user manual for your product.
Summary:
All Hanwha NVRs and Pentabrid DVRs can auto-discover IP cameras. This article will walk you through the process and help you enter camera credentials to authenticate the cameras properly.
Step By Step Guide:
1. Log in as admin.
2. Navigate to Setup > Camera > Camera Password.
3. Enter the admin credentials for the Hanwha cameras in both the top and bottom sections of the screen, then click Apply.
The Camera Password screen allows the recorder to automatically enter the credentials into the selected device on the Auto-Detect screen.
4. Navigate to Setup > Camera > Channel Setup and click Auto Detect.
5. Select the device(s) you wish to add, left-click and drag the camera(s) to Camera to register, then click Apply.
6. Click Apply on the Channel setup screen to finalize the process.
Comments
0 comments
Please sign in to leave a comment.