Applies to Models: XND-8081REV, XND-8081RE, XNV-6081REV, XNV-6081RE

Summary:

Below is a short video explaining the basics of using our PoE extender cameras to two devices at once.

Video:

Step By Step Guide:

1. Plug in a network-connected ethernet cable to the PoE+ ethernet port.

2. Wait until the network light on the camera's ethernet ports comes on. (0:14)

Note: This confirms an active connection between the camera and the network

3. Prepare another Device for installation.

4. Plug in an ethernet cable into the PoE pass-through port on the first camera.

Note: The Port Is Labeled PoE out

5. Connect the ethernet cable to your second camera's ethernet port.

Note: If you are using a second PoE extender camera, repeat this process