Update on Intel 8th-Gen NVR Changes (Ver. 5.34.12)

PRN

(15 Models)

 1600B2/1605B2/1610B2,  3200B2/B4/3210B2/B4, 3205B2/B4,

  6400B4/DB4, 6405B4/DB4/6410B4/DB4

XRN

(16 Models)

 1620B2, 3210B2/RB2/B4, 6410B2/B2/B4/DB4, 1620SB1, 820S

 6410DR/TE, 6410R/TE XRN-3210R/TE XRN-1620S/TE XRN-820S/TE XRN-6410B4/TU

 - Applied the Hanwha Vision logo / Added the quick sequence support.

 - Added the MD event auto-setting function for a camera and NVR when first registering  the camera.

 - Added the notification restriction function using NVR alarm input / Added the automatic web viewer logout function.

 - Added the DHCP activation function when DHCP IP address allocation is possible in the installation wizard.

 - Added the MAC filtering function / Added the serial number display function.

 - Added the camera registration and channel setting functions in the web viewer

   installation wizard.

  - Increased the maximum number of concurrent P2P users from 3 to 10.

  - Changed the operation method of the Shift key on the virtual keyboard of the local UI from fixed to one-time operation.

  - Made an improvement to display the capacity required for USB backup

  - Made an improvement to security vulnerabilities

  - Adjusted the list of Secure Cipher Suites and Compatible Cipher Suites when setting up HTTPS TLS.

  - Unified audio output control scenarios/instant viewer playback specifications for live and play back modes.

  - Made an improvement to support passwords of up to 64 characters for administrator, user, and camera accounts.

  - Solved the problem that UDP multicast does not work when registering the camera RTSP.

  - Solved the problem that using Genetec for FLIR CM-6405-11-I ONVIF camera linkage causes the system to reboot.

  - Resolved the GSC(Genetec client) linkage issue

  - Made an improvement to the case where using ONVIF to request the NVR network interface information from the GSC(Genetec client).

  - Solved the problem of not being able to set camera settings and receive events when linking some cameras

  - Solved the problem that the QR code was not displayed in the language set when accessing the help QR code.

  - Solved the problem that the system intermittently reboots when outputting video by changing the layout in the local UI.

  - Solved the problem that the installed certificate disappears when rebooting the system after certificate installation.

  - Solved the problem that the system reboots during sequence operation

  - Solved the problem that the NVR reboots when the camera passes an abnormal CGI response.

  - Changed ‘ONVIF port’ to ‘HTTP port’ in the UI menu for manual ONVIF camera registration.

  - Solved the problem of rebooting caused by insufficient space in the HDD due to an increase  in DB file size in a low bitrate environment.