Connecting to NAS from a Wisenet 5 camera fails

Applies to:  Wisenet 5 series Network Cameras

Summary:

When setting up recording to a Synology NAS from the camera's Web UI fails, follow the steps below to correct the issue.

Step-by-step:

The image below shows a failure connecting to the NAS:  (Figure 1)

Figure 1

1.  Logged into the Synology NAS, ensure the folder is in the root drive and empty:  (Figure 2)

Figure 2

2.  Ensure SMB v1 is set to the minimum protocol in the NAS Control Panel: (Figure 3)

Figure 3

3.  When you have confirmed it is set to SMB1, select Apply: (Figure 4)

Figure 4