Power and booting error due to arbitrary cable cutting

# XNV-6013M # Cable cut # power supply part damage

1. Installation case

   - Installed XNV-6013M inside transportation

2. Symptom

   - No power after installation inside the transportation, repetitive rebooting

3. Cause

   - Arbitrary device change: Cable cutting and cladding

   - Damage to camera power supply part, short between cut cables

                   [Arbitrary cable cutting]                                [Power supply part damage]

4. Measures

   - Avoid arbitrary disassembly or deformation

   - Apply insulation to unused cables

      . Separate insulation should be applied to each  cable

                       [Short prevention–Independent insulation]