Guide to XRP series NVR setting tool

1. Applicable models

  - XRP-4010B2/4110B2/4210B4/4310DB4

2. Purpose

  - To input S/N and MAC ADDRESS after replacing the main board,

3. Procedures for using the tool

    ① Select board replacement

    ② Serial number: Enter the serial number shown on the device label

    ③ Input the serial number: Press the button to check the output model name and region

    ④ Mac address: Enter the MAC ADDRESS 1 shown on the device label.

    ⑤ Start configuration: Run the configuration set with the information input in the system.

    ⑥ After confirming the completion message “Configuration is complete”, reboot the system.