Lens Initialization setting on focus of PTZ camera

Summary:
All Hanwha Vision PTZ cameras with an automatic lens initialization function has a default value of one day (24 hours) to re-initialize the lens. The initialization works by: Tilting the camera down -> Zooming in -> Adjusting the focus -> Moving back to the original position before lens initialization. This should be configured based on your installation scenario.

1. Model
- All network PTZ cameras with automatic lens initialization function

2. Purpose
- The default value of the focus lens initialization is 1day. Thus, the setting value should
   be changed as per user scenario if necessary

3. When to use automatic lens initialization on focus
- Focus blur may occur if the camera monitors complex scenes or is installed in an
  environment exposed to vibration. This function automatically optimizes focus at regular intervals

4. Able/Disable & working scenario
(1) Video & Audio → (2) Camera setting → (3) Focus → (4) Lens reset →
(5) Select 1day~7day(Able) / Select manual(Disable)
    〮 Able: Lens initialization performs at regular intervals starting from when booting camera
    〮Disable: Select ‘Manual’ to perform lens initialization once at user need

- Working scenario: (1) Camera Tilt down → (2) Zoom in → (3) Focus adjust → 
                                 (4) Move back to the position before lens initialization