Summary
This article explains which profile the NVR uses based on its behaviour.
Note: This is tested with XRN-1620B2 with the version 5.30.32_230222124325
| XRN NVR | Live Monitoring | Playback | |||||
| Multi-Split mode | Single CH | Note | Multi-Split mode | Single CH | Note | ||
| Dual REC: On |
NVR Local Monitoring | Live4NVR(low) profile | Recording(high) profile | Remote Profile is Live4NVR |
Live4NVR(low) profile | Recording(high) profile | |
| Wisenet Mobile | Network(Remote) profile | 1) Network (Remote) Profile on first connection 2) When reconnecting - Using a Saved Profile - Network (Remote) Profile if the user has not changed it |
User can change the profile setting one of the Network/Live/Record profile. Default is "Network" profile ("Remote" profile in NVR) | - Sub: Network(Remote) Profile - Main: Recording(Record) Profile |
Default is "Network (Remote)" profile. User can change the profile setting one of the Network/Live/Record profile. |
||
| Smart Viewer | Live4NVR(low) profile | Live4NVR(low) profile | Don't support automatic high/low profile change. It supports manual "Change Profile" in context menu(right mouse button). |
Recording(high) profile | Recording(high) profile | Don't support manual profile change. |
|
| Wisenet Viewer | In "Auto" mode. Wisenet Viewer is no difference between Multi-Split and Single CH mode. If "Tile" resolution is greater rhan 640x360, use Primary(Record/high) profile. Else, it use Secondary (Live4NVR/low) profile. |
It support: Auto/Primary/ Secondary profile. Default: - Primary -> Record, - Secondary -> Remote |
Wisenet Viewer is no difference between Multi-Split and Single CH mode. If "Tile" resolution is greater rhan 640x360, use Primary(Record/high) profile. Else, it use Secondary (Live4NVR/low) profile. |
It support: Auto/Primary/ Secondary profile. Default: - Primary -> Record, - Secondary -> Remote |
|||
| Dual REC: Off |
NVR Local Monitoring | Live4NVR(low) profile | Recording(high) profile | Recording(high) profile | Recording(high) profile | ||
| Wisenet Mobile | Network(Remote) profile | 1) Network (Remote) Profile on first connection 2) When reconnecting - Using a Saved Profile - Network (Remote) Profile if the user has not changed it |
User can change the profile setting one of the Network/Live/Record profile. Default is "Network" profile ("Remote" profile in NVR) | Recording(high) profile | Recording(high) profile | ||
| Smart Viewer | Live4NVR(low) profile | Live4NVR(low) profile | Don't support automatic high/low profile change. It supports manual "Change Profile" in context menu(right mouse button). |
Recording(high) profile | Recording(high) profile | Don't support manual profile change. |
|
| Wisenet Viewer | In "Auto" mode. Wisenet Viewer is no difference between Multi-Split and Single CH mode. If "Tile" resolution is greater rhan 640x360, use Primary(Record/high) profile. Else, it use Secondary (Live4NVR/low) profile. |
It support: Auto/Primary/ Secondary profile. Default: - Primary -> Record, - Secondary -> Remote |
Primary(recording,high) profile |
Primary(recording,high) profile |
It support: Auto/Primary/ Secondary profile. Default: - Primary -> Record, - Secondary -> Remote |
||
Table 1: profiles
Below 4 cameras are registered to the NVR.
| Live4NVR (Remote) | Recording (Max. Resolution) | |
| (2MP)QND-6082R | 640x360(16:9) | 1920x1080(16:9) |
| (4MP)QND-7082R | 640x360(16:9) | 2592x1520(16:9) |
| (5MP)QND-8020R: | 640x480(4:3) | 2592x1944(4:3) |
| (8MP)PNO-A9081R: | 640x360(16:9) | 3840x2160(16:9) |
Comments
0 comments
Please sign in to leave a comment.