Summary
The TNF-9010 parking guidance camera uses AI object detection to provide information on whether the car is parked/empty in the parking area.
This document describes how to display basic parking information when a parking guidance camera connects to SSM.
Conditions
TNF-9010 F/W version: 2.01.11_20220608_R248
SSM S/W version: 2.12.00_230127
Step By Step Guide
1. Create a map and register TNF-9010 in SSM's configuration.
Initially, there is no mark on Map Icon.
2. Upload the map image to be used and then select the site at the bottom of the map pattern.
3. Move the previously registered TNF-9010’s “CH1” to the required location and then click “Apply”
"P" will be displayed after the setting
Now the parking information is displayed when checking the corresponding map as below. (Total spaces/Parked vehicle/Space available)
4. In TNF-9010 WebViewer, go to Setting > Analytic > Parking Detection
Check Enable parking detection for a CH and set the Maximum vehicle for the area as below left image.
Total spaces and space available will be displayed on SSM Map as below right image.
As more channels(e.g. CH3, CH4, and CH5) are added, the information will be updated as shown below.
Comments
0 comments
Please sign in to leave a comment.