WRR-Q-A201W1 mirrored boot system is corrupt how do I correct this?

Applies to Models: WRR-Q-A201W1 

Summary:

There will be incidents where the Windows 10 image on the WRR-Q-A201W1 servers becomes unresponsive or corrupted. This article will cover the steps for re-imaging Windows on to the Raid 1 of the WRR-Q-A201W1. 

Explanation of Behavior:

• Windows will be locked up at Windows is preparing to load screen
• Windows will be locked up at Windows is preparing to repair 
• The F8 option to boot into a safe boot environment is not responsive.

Resolution:

• You should go to the Dell support page >Here< and apply all critical updates to the system before engaging the support group.
• Should it be determined that Windows on this server is corrupt beyond recovery, you must re-image the server. 
• You will need to contact support for the ISO for this server at techsupport@hanwha.com
• Use Rufus to burn the supplied image onto an 8gb thumb drive

Note: Use the default settings for Rufus once you have selected the
source file, and the destination disk.

• Delete the Raid 1 array BEFORE attempting re-image

Note: Click >Here< for the Dell walkthrough of deleting the Raid 1 array

• Re-create the Raid 1 array

Note: Click >Here< for the Dell Article to recreate the Raid 1 array