Elliot Leem

 The cable attaching the lenses such as the SLA-T1080F/T2480/T2480V/T4680/T4680V to the PNM-9000QB can be a maximum length of 15m. The product code for the cable is: SCL-150. The pin connectors of ...

 To connecting the SPC-7000 keyboard to a DVRConnect TX+ on DVR to TX+ on port 1 of SPC-7000Connect TX- on DVR to TX- on port 1 of SPC-7000Set serial settings on DVR - make sure Baud rate is correc...

 The below article instructs users how to re-install WAVE on our SolidEdge cameras, PNV-A6081R-E1T and PNV-A6081R-E2T When the WAVE application has been removed or not installed, the application st...

 The following table shows what features such as AI search are supported on X-Series and P-Series NVRs O = feature is supportedX - feature is not supported 

 Many Wisenet cameras offers alarm inputs and outputs, these are TTL outputs and are not volt free, a transistorised relay is required to obtain a volt free output. The PNO-A9081RLP Road-Ai ANPR ca...

 Much like our other ANPR solutions, Road-AI has the facility to import a plate list from a .csv file. In this example I have entered licence plates into Notepad in the below format.  Once you have...

 To export CSLogs from SPD Decoders you can use the below URLs: SPD-151 - <Decoder IP>/web/#/cslogSPD-152 - <Decoder IP>/uwa/#/cslogThe SPD-152 also give the option for CORE logs

 When creating groups in Smart viewer they are named Group, Group(1), etc. by default.To change these group names - click the gear icon at the top left and the Setup screen will open.Click on the g...

 The below article demonstrates how to configure layouts in Wisenet ViewerWisenet Viewer utilises dynamic layouts where users can freely move the camera channels around as well as change the tile s...

  Wisenet Viewer will not connect to a camera directly.Wisenet Viewer will only connect to DVRs and NVR, for s list of compatible DVRs and NVRs    NVR4-channelSRN-473S XRN-420S, XRN-410S, QRN-43...