Elliot Leem

  Wisent Viewer is only compatible with DVRs and NVRs, you cannot make a direct connection to a camera using Wisenet Viewer   NVR4-channelSRN-473S XRN-420S, XRN-410S, QRN-430S, QRN-420S, QRN-410S, ...

 To change the playback speed of recorded footage in Wisenet Mobile, click on the 'x1' button to bring up the playback speed menu, you can then scroll up or down to select the appropriate speed 

 To receive push notifications from a NVR in Wisenet Mobile, firstly create the event rule to send the notification to the NVR: Add the NVR to Wisent Mobile via the QR code, push notifications will...

 An article on Vulnerability Description affecting SolidEdge products A flaw was detected that allows for a remote code execution during the installation of Wave on the camera device.The Wave serve...

 The below article lists out the steps for users to increase or adjust the reserved disk space in Wisenet WAVE By default, WAVE reserves free space for every single local disks and network shared d...

 This article serves to clarify a few misconceptions pertaining the preview in the camera layout in WAVE, the network traffic and resolution settings. A user may assume that the preview pertains to...

  For camera compatibility information (camera firmware version etc.) with Exacq Vision, you can visit: Exacq Technologies | IP Security Solutions, IP Camera Integrations   Here you can type in th...

 The following settings should be applied to a server running RAID to ensure optimum operation with Wave. These settings should be applied before Wave is used to record cameras as these settings wi...

 Vaxtor is a licenced ANPR application that can be installed directly on supported Wisenet cameras.This is a step-by-step guide for configuring Wave user accounts, Wave rules for bookmarks and the ...

 Wisenet Wave V5.1 brings security enhancements that may affect older 3rd party integrations such as Number Ok Edge, Road AI and RoadWatch. 3rd party developers are advised to use the newer method ...