Jon Henry

Applies to Models: SNH-V6435DN   1. Check to see if Human Detection is enabled.  - Go to Settings > Event > Human Detection ON 2. Set up and use Motion Zones.   - Go Settings > Event > Motion Zone ...

Applies to Models: SNH-V6435DN  Yes, but it is recommended to install the SmartCam D1 in a dry area.

Applies to Models: All Smartcam Models  1. You can turn off the <Status LED> in the <Additional function setting> menu on the camera settings screen.

Applies to Models: All Smartcam Models  You can arm/disarm your SmartCam by tapping the security icon in the app to enable/disable push notifications.You can manually arm/disarm your SmartCam or se...

Applies to Models: All Smartcam Models   If you cannot register the camera even after following the instructions given on the screen, check the router settings.1. To register a camera, the Wi-Fi fu...

Applies to Models: All Smartcam Models 1. If the camera is too far from the router or there are too many routers near the camera, it may result in a failure to retrieve the router. In this case, pr...

Applies to Models: All Smartcam Models  1. Wireless connection (Wi-Fi Direct Setup)To connect the camera via Wi-Fi, you need a router that provides a Wi-Fi connection function.Press the Wi-Fi Direc...

Applies to Models: All Smartcam Models    1. Red light ON: in the booting process2. Red light flickering: booting completed3. Blue light flickering: camera is searching for available Wi-Fi routers4...

Applies to Models: SNH-E6440BN    1. SNH-E6440BN is a certified waterproof and dustproof product (IP66) that can be installed outdoors (limited to the camera only).Install the camera (8m of cable) ...

Applies to Models: All Smartcam Models  1. To provide a seamless video for each camera model and wireless network method (Wi-Fi, LTE, 3G) for mobile device, a different video profile is provided.2....