Aaron Saks
- Total activity 8
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 0
Activity overview
Latest activity by Aaron Saks-
Aaron Saks created an article,
How do I reset WRN-810S and WRN-1610S?
Applies to Models: WRN-810S, WRN-1610SSummaryIf you have network interface issues on the WRN-810S or WRN-1610S and need to reset the interfaces, use the attached script to correct the problem. Thi...
-
Aaron Saks created an article,
How to Factory Default a SolidEDGE camera
Applies to: PNV-A6081R-E1T (1TB) and PNV-A6081R-E2T (2TB)SummaryThe SolidEDGE camera can have its firmware upgraded or factory defaulted and retain the WAVE VMS and the recorded video storage. Thi...
-
Aaron Saks created an article,
What are the RTSP URLs of Hanwha Devices?
Applies to Models: All IP Cameras, NVR, DVR, VMS, and EncodersSummaryReal-Time Streaming Protocol (RTSP) is one of the primary backbone application-level protocols for streaming video from devices....
-
Aaron Saks created an article,
Hallway View limitation on multi-sensor Wisenet 7 cameras
Applies to Models: PNM-8082VT, PNM-12082R, PNM-7082RVD Issue Summary Certain functions on cameras that ship with a single system on a chip (SoC) for multiple sensors running Wisenet 7 are linked. M...
-
Aaron Saks created an article,
How do I configure analytics in the WAVE Client?
Applies to: Certain makes and models of Hanwha cameras Summary This article provides instructions for configuring advanced analytics in WAVE Client on certain makes and models of cameras. Configuri...
-
Aaron Saks created an article,
WAVE: How to access overlapped video data
Applies to: WAVE, NVR Summary When using Wisenet NVRs, the system has a built-in feature that ensures video data is preserved in the event of time changes—whether it's a manual time change, an NTP...
-
Aaron Saks created an article,
How Do I reinstall the LPR - Application?
Applies to Models: XNV-6120R/LPR & XNO-6120R/LPRPlease use the camera and software version compatibility listed below:Camera firmware v2.10.01 or greater -> LPR Application v3.20.45Camera firmware ...
-
Aaron Saks created an article,
Wisenet Road AI LPR Camera Event Setup for Wisenet NVRs
Road AI “Generic Event” setup for Hanwha NVR This guide will walk you through the steps involved in the Road AI application setup menu, as well as on the NVR setup menu to be able to receive generi...