Applies to: All rack-mountable Hanwha-branded DELL servers

WARNING:

The steps below are for instructional purposes or emergency use only.
Hanwha Vision America recommends that only a qualified IT Professional attempt this process.
Hanwha Vision America and its affiliates are not responsible/will not accept responsibility for damage to hardware, hardware components, loss/corruption of data, or any damages resulting from using this process.

Summary

This article provides instructions for installing a rack-mountable Hanwha-branded DELL server.

Installing a Hanwha-branded DELL Server

To install a Hanwha-branded DELL server:

1. Mount your server into a rack. 

   NOTE: Non-Desktop Hanwha branded DELL Servers are intended to be rack mounted. 
   Failure to rack mount your server may impact performance or cause physical 
   damage to the unit.

2. Connect a monitor to the server. 

   NOTE: Every Hanwha branded DELL Server come with display adaptors (dongle); 
   select the correct adaptor for your application based on the server's GPU 
   and display device.

3. Connect both power cables.

   NOTE: Most Hanwha-branded DELL Servers larger than 1U have redundant power 
   supplies. This requires two power cables plugged into a power source.

4. Press the Power button in the front of the server, top right corner. 

   The server will take about 3 minutes to show the video.
    

5. Continue through the standard Windows setup.