Applies to: All rack-mountable Hanwha-branded DELL servers

WARNING:

The steps below are for instructional purposes or emergency use only.
Hanwha Vision America recommends that only a qualified IT Professional attempt this process.
Hanwha Vision America and its affiliates are not responsible/will not accept responsibility for damage to hardware, hardware components, loss/corruption of data, or any damages resulting from using this process.

Summary

This article provides instructions for installing a rack-mountable Hanwha-branded DELL server.

Installing a Hanwha-branded DELL Server

To install a Hanwha-branded DELL server:

1. Mount your server into a rack
   
   Non-Desktop Hanwha branded DELL Servers are intended to be rack mounted.
   Failure to rack mount your server may impact performance or cause physical damage to the unit.
    
2. Connect a monitor to the server
   
   Every Hanwha branded DELL Server come with display adaptors (dongle); 
   choose the correct adaptor for your application based on the server's GPU and display device.
    
3. Connect both power cables
   
   Most Hanwha branded DELL Servers larger than 1U have redundant power supplies.
   This requires two power cables plugged into a power source.
    
4. Press the Power button in the front of the server, top right corner
    
5. The server will take about 3 minutes to show the video
    
6. Proceed through the standard Windows setup